Posts

Showing posts from September, 2014

Sanding and Shaping

Image
In previous posts, I completed the assembly of the stand and the rocking horse itself, so all the major parts are now complete; the next stage of construction will come pretty much at the end of the project - mounting the horse on the stand.  Before that though, there's a whole lot of sanding to be done!

Sanding the stand is straightforward; the wood is already very smooth as delivered and it consists mainly of large flat surfaces.  You should ideally have sanded each piece down to around 220 grit sandpaper before assembly, so the main tasks now are to ensure that there are no rough spots or glue residue left anywhere and to ensure that the wedged tenon joints are sanded flush.  You can use an electric sander for most of this, but the posts are a little trickier and you'll need to do those by hand, and take your time. If you'll be dying your horse, like I did, it's important to get a consistent smoothness across each piece, because the dye will be absorbed differently b…